Atlantic Waterway

Light duty galvanised steel pontoons

The Atlantic Waterways pontoon system is a modular design that is suitable for use in sheltered and inland waterways.

  • Modular pontoon systems with comprehensive range of standard units. Special sizes on request.
  • Standard walkway loading of 1.5kN/m² with option for 2.5kN/m²
  • Walkways available in nominal widths of 2.5m, 2.0m and 1.5m
  • Continuous ducts with anodised aluminium covers as standard
  • Concrete or polyethylene floats on walkways
  • Finger pontoons available in multiples of 1m from 4m to 12m.
  • Polyetyhlene floats on fingers
  • Universal finger pontoon positioning
  • Galvanised steel structure
  • Optional continuous duct liner
  • Universal pile guide adjustment
  • Fingers shaped for ‘stern on’ power boat mooring
  • Fully protected connections

LOADING

The design structural loadings are specified on the ‘General Design’ datasheet. The standard stabilised vertical loadings applied between ducts.

FREEBOARD

The system has a minimum unladen freeboard of 500mm

STRUCTURE

A lighter construction for the less extreme conditions experienced in sheltered and inland waterways.Each component has a welded
steel frame structure comprising standard sections and a specially rolled edge section. The frames are hot dip galvanised in single sections to BS EN ISO 1461:1999. An optional additional paint treatment may be applied.

DECKING

Standard decking is 145mm x 21mm hardwood boards with a special grooved profile. There are a number of further decking options (see ‘Decking’ datasheet). The decks are fixed with stainless steel screws..

SERVICE DUCTS

Service ducts are provided down both sides of all walkways as standard. The duct size is 220mm x 90mm deep. Duct covers are anodised aluminium in 2m sections. A continuous PVC service support tray can be provided in the duct as an optional extra.

CLEATS

Walkways are designed for fitting Intermarine standard cast aluminium cleats at 1m centres. Fingers up to 7m long have 4 No. cleats fitted as standard and fingers of 8m and longer have 6 No.

The cleats have a 2 tonne inline breaking load.

MOORING OPTIONS

PILING is the preferred method of mooring pontoons. Standard guides for bolting to the sides of walkways are available with low
friction linings for piles with diameters up to 500mm. Special designs for incorporating the piles within the width of the walkway,
larger piles or roller bearings can be offered.

FLEXIBLE MOORINGS Standard connections for chains or ropes ranging from simple brackets to special designs are available.

RADIUS ARMS Designs using A frames or radius arms have been developed but would be custom designed for each site. This mooring option is commonly used for linear berths in rivers or canals.

FLOATS

  • Professionally manufactured under quality controlled conditions
  • Expanded polystyrene core
  • Stainless steel reinforcing
  • Stainless steel fixing bolts

POLYETHYLENE

  • Medium density polyethylene casings
  • Single piece rotary mouldings to Intermarine design
  • Fused closed cell polystyrene core

WALKWAYS

Standard walkways are supplied with concrete floats but may be fitted with polyethylene floats in catamaran layout as an option.

  • CONCRETE
  • DFO
  • DF1
  • DF2
  • LENGTH
  • 2.87
  • 2.37
  • 2.87
  • WIDTH
  • 2.37
  • 1.87
  • 1.50
  • DEPTH
  • 0.810
  • 0.735
  • 0.750
  • WEIGHT (KG)
  • 1845
  • 1150
  • 1150
  • POLYETHYLENE
  • RF554
  • RF555
  • LENGTH
  • 1.95
  • 1.95
  • WIDTH
  • 0.55
  • 0.55
  • DEPTH
  • 0.45
  • 0.525

FINGERS

Standard fingers are fitted with polyethylene floats.

  • POLYETHYLENE
  • RF517
  • RF506
  • RF507
  • RF508
  • RF706
  • RF707
  • RF708
  • RF906
  • RF907
  • RF908
  • LENGTH
  • 1.10
  • 1.50
  • 1.50
  • 1.50
  • 1.50
  • 1.50
  • 1.50
  • 1.50
  • 1.50
  • 1.50
  • WIDTH
  • 0.50
  • 0.50
  • 0.50
  • 0.50
  • 0.70
  • 0.70
  • 0.70
  • 0.90
  • 0.90
  • 0.90
  • DEPTH
  • 0.70
  • 0.60
  • 0.70
  • 0.80
  • 0.60
  • 0.70
  • 0.80
  • 0.60
  • 0.70
  • 0.80

EXAMPLE PROJECTS

Burton Waters

Burton Waters Marina Village, Lincoln

150 berths + residential moorings

Linton Lock

Linton Lock

Lock waiting pontoons

Colwick Marina

Colwick Marina, Nottingham

Design, manufacture, supply and install of walkway pontoons, mooring fingers, and access bridges

© Copyright - Intermarine